65|HT

Nominal Capacity @ Radius
65 USt @ 7 ft
55 mt @ 2.1 m
Standard Boom
36.8 ft – 115 ft
11.2 m – 35 m
Telescope System
Full Power
Full Power
Attachment - Option 1
28.5 ft Bi-Fold Lattice Fly
8.7 m Bi-Fold Lattice Fly
Attachment - Option 2
28.5 ft – 51 ft Bi-Fold Lattice Fly
8.7 m – 15.5 m Bi-Fold Lattice Fly
Maximum Tip Height
171 ft
52.2 m
Maximum Line Pull
15,822 lbs
70.7 kN
Maximum Speed
462 fpm
140.8 m/min

Key Features

  • 36.8 ft – 115 ft full-power greaseless formed boom (five feet longer than predecessor)
  • 28.5 – 51 ft two-piece onboard fly
  • Full fly is stowable on the machine, and no capacity deducts for stowed attachment
  • 171 ft maximum tip height with full attachment
  • Transports fully equipped at under 84,000 lbs with 18,400 lb counterweight
  • 100% designed, tested, and built in the USA
  • EPA 2022 Compliant On-Highway 370 HP Cummins L9 Engine
  • ZF AS-Tronic (no clutch pedal) Manual Transmission
  • Link-Belt Pulse operating system, including CALC-selectable outrigger extension system
  • Link-Belt Vision Package – Standard
  • Flat, textured finish deck design — maintains four points of access regardless of upper position

Frequently Asked Questions

What is a 65|HT’s transport weight?2026-06-22T13:43:48-05:00

A fully equipped 65|HT can reduce its transport weight to less than 65,000 pounds with all counterweight removed.

What are the boom dimensions of the 65|HT?2026-06-22T13:43:08-05:00

The 65|HT includes a new four-section 36.5–115-foot (11.2–35-meter) full-power boom that reaches a maximum tip height of 125 feet (38.1 meters).

Can you tell me more about the 65|HT’s Pulse system?2026-06-22T13:42:26-05:00

Link-Belt Pulse is a Link-Belt-designed total crane operating system that utilizes an in-cab display as a readout and operator interface with on-board diagnostics, including a rated capacity limiter, wind speed, boom length and angle, radius of load, and crane configuration.